I followed the directions here: Pogoplug Series 4 | Arch Linux ARM.
It took only about 15 minutes, and the iperf scores are outstanding:
|
1 2 3 4 5 6 7 8 |
[root@alarm ~]# iperf -c server ------------------------------------------------------------ Client connecting to server, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.241 port 50914 connected with 192.168.1.8 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 382 MBytes 321 Mbits/sec |
The install was on an 2.5″ SSD disk I had laying around, which explains the fast install. But that’s the point–the pogoplug 4 has a SATA port, so I can use an SSD.
Post a Comment